Click here
Sarens
USA
Close
SARENS
IN THE USA

Sarens entered US Heavy lift and heavy haul space in 2009 by acquiring Rigging International, a company based in California. We officialy changed the name to Sarens USA, INC. in 2012.

Sarens USA, INC has offices in Houston from where we cover the Gulf area, in Montana from where we cover the Midwest, and in Rowesville from where we cover the East coast.

SERVICES

We provide Engineered Heavy Lifting Services

Heavy Lifting

  • We provide Project-based heavy lift services
  • Turnaround maintenance
  • Installation of turbines & generators
  • Erection of steel structures
  • Erection of heat exchangers
  • Installation of mechanical equipment, drums, casing / inlet ducts, vessels, pumps

Heavy Transport Services

  • Out of Gauge and abnormal load transport
  • Project based heavy transport
  • Rental of specialized transport equipment
  • Factory-to-Foundation

Decomissioning and Dismantling Services

Rental Services

  • We provide bare lease as well as operated rentals services
  • Skidding & jacking

OUR
MARKETS

  • New nuclear plant construction
  • Operating nuclear plant
  • Small Modular Reactor (SMR)
  • Decommissioning
  • Department of Energy (DOE)
  • Government
  • Thermal power plants
  • Oil & Gas
  • Petrochemical
  • Major civil projects including:
    • Airports
    • Bridges
    • Stadia
    • Ports & yards
    • Oversized heavy haul

EQUIPMENT

  • Hydraulic cranes
  • Cranes ranging from 90T to 3200T
  • Hydraulic jacks
  • Strand jacks
  • Self Propelled Modular Trailers
  • Semi trailers
  • Out of Gauge transport

OFFICES

Houston, Texas (Office & Yard)
10855 John Ralston Rd
Houston, TX 77044
Tel: 832 536 3669
Fax: 832 615 2678

Missoula, Montana (Office)
7168 Expressway
Missoula, MT 59808
Tel: 406 543 4427

Rowesville, South Carolina (Office & Yard)
122 River Dr
Rowesville, SC 29133
Tel: 832 714 0176

Sorrento LA (Yard)
9204-A Highway 61
Sorrento, LA 70778
Tel: 225 450 7027

Sales
info.us@sarens.com

Accounts
ap.us@sarens.com

Sarens Launches SGC-90 Electric Ring Crane
Nicknamed “Little Celeste”, Sarens’ new electric crane can generate its own power
10
November 2020

As an innovator in the heavy lift industry, Sarens is proud to announce the newest addition to its global fleet: the SGC-90, an environmentally-friendly electric ring crane ideal for projects in the nuclear, logistics, construction, and offshore wind sectors. With a project already lined up for this year, the SGC-90, nicknamed “The Little Celeste”, is ready to make an impact.

The newest crane in the fleet was developed in response to market demand for heavy lift cranes with capacities greater than 80.000 TM. Its ring diameter is 35 metres, maximum counterweight is 2.700 tonnes, and maximum load moment is 99.000 tonnes. It can be configured in a variety of ways, with main boom lengths of 100, 120, and 130 metres and a small jib of 200 tonnes. The Sarens heavy duty and light jib can also be used to reach further or attain a higher hook height.

Clients who choose the SGC-90 can expect mobilisation and demobilisation to match that of the SGC-120, approximately four to five weeks.

Environmentally-friendly features

The most unique aspect of the SGC-90 is that it is an electrical crane. While all Sarens’ other SGCs are hydraulic cranes, the SGC-90 can be connected to the electric grid and be fully powered without a traditional fuel source. Uniquely, the Little Celeste can even produce its own energy, recovering and reusing the electricity it generates each time it lowers a load. When connected to the national grid, it recovers all produced energy and feeds it back, reducing energy consumption by up to 40%.

Because it runs on electricity, the SGC-90’s operation is very silent. It is energy-efficient and environmentally friendly, emitting no exhaust and posing no oil contamination hazards. Finally, the crane is maintenance-friendly and reliable, with no hydraulic pumps, filters, or engines.

Development and Safety

The Sarens RDTS team developed the concept of the crane in-house, performing all calculations and coordinating with different contractors to construct the crane on a tight timeline. Although the crane was developed during the Covid-19 pandemic, this did not impact progress because Sarens had already implemented rules and procedures to minimise possible health impacts and promote employee safety.

The Little Celeste conforms to the latest crane standards for safety and security. Directive, static, and dynamic overload tests as well as function and safety tests have all been successfully performed according to the Machinery Directive, and witnessed by the certification company. 

Sarens looks forward to introducing the Little Celeste to clients and debuting this powerful, efficient, and environmentally-responsible crane in the field! 

Watch the video here!

Download the SGC-90 Brochure here!

Download the Sarens Sarens Giant Crane (SGC) Family Brochure here!