Sarens Installs Generator at Hong Kong Black Point Power Station
Under the threat of typhoon season, Sarens worked to transport
and lift a Siemens generator in Hong Kong
Under the threat of typhoon season, Sarens worked to transport and lift a Siemens generator in Hong Kong
April 2019: Under the threat of typhoon season, Sarens crewmembers at Hong Kong's Black Point power station recently worked to transport and lift a Siemens generator. Black Point station is one of the planet's largest gas-fired combined-cycle power stations and is owned by the Castle Peak Power Company Limited (CAPCO), a joint venture between CLP Power Hong Kong and China Southern Power Grid International.
At the beginning of the project, the 450-tonne generator had been transported to a secure place at the HK Black Point project site by two 16-axle SPMTs. A six-person crew used an NTL 900-tonne floating crane to transport it to the lift site, working within the confines of a small site with heavy traffic. The generator, which measured 13.6 x 4.5 x 5.6 metres, was then transported to the lifting position and lifted and rotated into place.
To execute the project successfully, Sarens relied on 32-axle lines SPMT, two 250-tonne overhead cranes, and a CC6800 in SSL 96m, SSL/LSL 108m configuration. The equipment was mobilised by barge from Belgium, and transport took about one month. Assembly of the CC6800 took about one week.
In all, 20 crew members were involved in the operation. Sarens congratulates every one of them for a job well done!