Sarens entered US Heavy lift and heavy haul space in 2009 by acquiring Rigging International, a company based in California. We officialy changed the name to Sarens USA, INC. in 2012.
Sarens USA, INC has offices in Houston from where we cover the Gulf area, in Wisconsin from where we cover the Midwest, and in Rowesville from where we cover the East coast.
We provide Engineered Heavy Lifting Services
Heavy Lifting
Heavy Transport Services
Decomissioning and Dismantling Services
Rental Services
SARENS IN THE USA
10855 John Ralston Rd
Houston, Texas 77044
+ 1 832 536 3669
+ 1 832 615 2678
info.USA@sarens.com
SARENS IN THE USA
9204-A Highway 61
Sorrento, Louisiana 70778
+ 1 225 450 7027info.USA@sarens.com
SARENS IN THE USA
15095 W 42nd St.
Odessa, TX 79764
832-493-5741info.USA@sarens.com
Sarens USA – East
75 N. Haddon Ave Suite 101
Haddonfield, NJ, 08033
+1 856 503 2121
Paul.Fuerneisen@Sarens.com
SARENS USA OFFSHORE WIND DIVISION
75 N. Haddon Ave Suite 101
Haddonfield, NJ 08033
856-873-0473
Paul.Fuerneisen@Sarens.com
SARENS NUCLEAR & INDUSTRIAL SERVICES
1430 South Goodland Road
Hartford, WI 53027
+ 1 414 299 0858
nuclear@sarens.com
Sarens France is pleased to announce the successful transport of a CMN HydroQuest tidal turbine on behalf of Cherbourg Manutention. Sarens was entrusted with moving the turbine from the CMN workshop in Cherbourg, France and onto the modern installation vessel Normand Vision, operated by the Norwegian company Ocean Installer.
The CMN HydroQuest turbine had been selected as a demonstration project by the French Agency for Environment and Energy Management (ADEME), through a government-funded pilot program. It will be tested to determine performance in real conditions prior to being approved for commercial use. If this demonstration project proves to be successful, it will open the way for commercial tidal farms at high-potential sites in France and the world.
To complete this special transport operation, Sarens used 2 x 18 lines SPMT to move the 25-metre wide and 11-metre tall tidal turbine from the factory to the quay, a total distance of 2 kilometres.
Operations at the harbour were completed smoothly, efficiently, and without delay.
“Thank you for your strong involvement, which made it possible to meet the expected deadline so that our tidal turbine could be installed in the best condition on the Paimpol-Bréhat test site,” said Mickaël Verdiere, CMN-HydroQuest Project Manager. “Congratulations to everybody involved and your teams on this great success.”
Sarens France wishes CMN-Hydroquest a successful installation and looks forward to future collaborations.