Click here

Sarens entered US Heavy lift and heavy haul space in 2009 by acquiring Rigging International, a company based in California. We officialy changed the name to Sarens USA, INC. in 2012.

Sarens USA, INC has offices in Houston from where we cover the Gulf area, in Wisconsin from where we cover the Midwest, and in Rowesville from where we cover the East coast.


We provide Engineered Heavy Lifting Services

Heavy Lifting

  • We provide Project-based heavy lift services
  • Turnaround maintenance
  • Installation of turbines & generators
  • Erection of steel structures
  • Erection of heat exchangers
  • Installation of mechanical equipment, drums, casing / inlet ducts, vessels, pumps

Heavy Transport Services

  • Out of Gauge and abnormal load transport
  • Project based heavy transport
  • Rental of specialized transport equipment
  • Factory-to-Foundation

Decomissioning and Dismantling Services

Rental Services

  • We provide bare lease as well as operated rentals services
  • Skidding & jacking


  • New nuclear plant construction
  • Operating nuclear plant
  • Small Modular Reactor (SMR)
  • Decommissioning
  • Department of Energy (DOE)
  • Government
  • Thermal power plants
  • Oil & Gas
  • Petrochemical
  • Major civil projects including:
    • Airports
    • Bridges
    • Stadia
    • Ports & yards
    • Oversized heavy haul


  • Hydraulic cranes
  • Cranes ranging from 90T to 3200T
  • Hydraulic jacks
  • Strand jacks
  • Self Propelled Modular Trailers
  • Semi trailers
  • Out of Gauge transport


Sarens USA
10855 John Ralston Rd
Houston, Texas 77044
+ 1 832 536 3669
+ 1 832 615 2678

Sarens USA
9204-A Highway 61
Sorrento, Louisiana 70778
+ 1 225 450

Sarens Nuclear & Industrial Services
122 River Drive
Rowesville, South Carolina 29133
+ 1 803 534 1348
+ 1 803 535 6093

Sarens Nuclear & Industrial Services
1430 South Goodland Road
Hartford, WI 53027
+ 1 414 299 0858

Sarens Transports and Assembles TBM Drilling Machine in Poland
Sarens crew prepares TBM for boring operations below the Świna river
September 2021

Sarens equipment and personnel were recently on site in Świnoujście, western Poland, to transport and assemble TBM drilling elements to be used in boring a tunnel below the Świna River. 

For this operation, two sets of SPMTs transported the TBM elements from the port to the construction site for assembly. Then, two CC3800 cranes and an AC300 lifted and assembled the machine so it would be ready for boring operations.

The TBM, which measured 14m in diameter with the heaviest component weighing 265 tonnes, was assembled by a CC3800-1 crane in LSL-2 54m configuration. The second CC3800-1 crane, in SSL-1 54m configuration, lifted gantries on the other end of the construction site, with the heaviest load weighing 215 tonnes.

Before the operation could begin, over 100 trucks were used to bring Sarens equipment on site, which took approximately four days. This would have been impossible to accommodate on such a small worksite had it not been for the special planning done by transport manager Arkadiusz Małczak. 

Next, erecting the two cranes presented its own challenges due to narrow access roads, confined space, and a large number of components on the jobsite. Two teams totalling 14 people worked day and night to assemble the cranes and prepare them for operation.

Sarens would like to thank project manager Michał Izmajłowicz, project owner Andrzej Kaźmierczak, site manager Jarosław Switoń, and main crane operator Arkadiusz Mytych, as well as all the crew members who were involved in making this project a success.