Click here
Sarens
USA
Close
SARENS
IN THE USA

Sarens entered US Heavy lift and heavy haul space in 2009 by acquiring Rigging International, a company based in California. We officialy changed the name to Sarens USA, INC. in 2012.

Sarens USA, INC has offices in Houston from where we cover the Gulf area, in Wisconsin from where we cover the Midwest, and in Rowesville from where we cover the East coast.

SERVICES

We provide Engineered Heavy Lifting Services

Heavy Lifting

  • We provide Project-based heavy lift services
  • Turnaround maintenance
  • Installation of turbines & generators
  • Erection of steel structures
  • Erection of heat exchangers
  • Installation of mechanical equipment, drums, casing / inlet ducts, vessels, pumps

Heavy Transport Services

  • Out of Gauge and abnormal load transport
  • Project based heavy transport
  • Rental of specialized transport equipment
  • Factory-to-Foundation

Decomissioning and Dismantling Services

Rental Services

  • We provide bare lease as well as operated rentals services
  • Skidding & jacking

OUR
MARKETS

  • New nuclear plant construction
  • Operating nuclear plant
  • Small Modular Reactor (SMR)
  • Decommissioning
  • Department of Energy (DOE)
  • Government
  • Thermal power plants
  • Oil & Gas
  • Petrochemical
  • Major civil projects including:
    • Airports
    • Bridges
    • Stadia
    • Ports & yards
    • Oversized heavy haul

EQUIPMENT

  • Hydraulic cranes
  • Cranes ranging from 90T to 3200T
  • Hydraulic jacks
  • Strand jacks
  • Self Propelled Modular Trailers
  • Semi trailers
  • Out of Gauge transport

OFFICES

SARENS IN THE USA
10855 John Ralston Rd
Houston, Texas 77044
+ 1 832 536 3669
+ 1 832 615 2678
info.USA@sarens.com

SARENS IN THE USA
9204-A Highway 61
Sorrento, Louisiana 70778
+ 1 225 450 7027info.USA@sarens.com

SARENS IN THE USA
15095 W 42nd St.
Odessa, TX 79764
832-493-5741info.USA@sarens.com

Sarens USA – East
75 N. Haddon Ave Suite 101
Haddonfield, NJ, 08033
+1 856 503 2121
Paul.Fuerneisen@Sarens.com

SARENS USA OFFSHORE WIND DIVISION
75 N. Haddon Ave Suite 101
Haddonfield, NJ 08033
856-873-0473
Paul.Fuerneisen@Sarens.com

SARENS NUCLEAR & INDUSTRIAL SERVICES
1430 South Goodland Road
Hartford, WI 53027
+ 1 414 299 0858
nuclear@sarens.com

Sarens Showcases Lifting Power for One of Africa’s Highest New Bridges
Sarens lifts and installs several steel beams for Al Hadarat Bridge project in Cairo, Egypt
9
August 2023

Sarens is proud to have helped construct what will be one of the highest bridges in Africa, the Al Hadarat Bridge in Cairo. Over the course of several weeks, Sarens completed two triumphant lifting operations on behalf of Arab Contractors, bringing the bridge project closer to its debut.

Sarens first lifted and installed eleven 150-tonne, 41-metre steel beams. For this, the crew used a CC4800 crane in SSL configuration and 66-metre main boom, as well as 270T SL CW. After taking each beam from its initial location, they would slew the crane into position. The four-member crew successfully performed eleven picks over the course of one week.

The equipment for these lifts was carefully chosen for its capacity, and performed smoothly during the operation. The CC4800 was delivered to the site after completing work on another project. Rigging took five days, and the crew had to carefully work within extremely tight spaces, with only a 10cm clearance at some points! 

For the next series of lifts, Sarens brought in the CC2600H with a 78-metre main boom for another tight and high execution. The four-person crew then installed the 63 beams, each of which weighed 90 tonnes and measured 50 metres long. After taking each beam from the trailer, the team slewed into position, performing 63 such picks within three weeks.

The crane was once again chosen for its capacity, and its positioning was the most important part of the planning phase, as a series of very tight lifts were required. The crane was brought in from another completed operation, and rigging took three days. The crane’s location was again very tight, with a mere 15cm clearance from its surroundings.

Working closely with the client, project manager Mohamed Abd El Nasser and country manager Essam Adel ensured that every detail was accounted for, from the number of lifts required to exact lifting locations during installation.

Despite some high winds, the team successfully completed the lifts required for this iconic project. The world has its eyes on the new Al Hadarat Bridge project, and Sarens is proud to have played our part in making it a reality!