Click here
Sarens
USA
Close
SARENS
IN THE USA

Sarens entered US Heavy lift and heavy haul space in 2009 by acquiring Rigging International, a company based in California. We officialy changed the name to Sarens USA, INC. in 2012.

Sarens USA, INC has offices in Houston from where we cover the Gulf area, in Montana from where we cover the Midwest, and in Rowesville from where we cover the East coast.

SERVICES

We provide Engineered Heavy Lifting Services

Heavy Lifting

  • We provide Project-based heavy lift services
  • Turnaround maintenance
  • Installation of turbines & generators
  • Erection of steel structures
  • Erection of heat exchangers
  • Installation of mechanical equipment, drums, casing / inlet ducts, vessels, pumps

Heavy Transport Services

  • Out of Gauge and abnormal load transport
  • Project based heavy transport
  • Rental of specialized transport equipment
  • Factory-to-Foundation

Decomissioning and Dismantling Services

Rental Services

  • We provide bare lease as well as operated rentals services
  • Skidding & jacking

OUR
MARKETS

  • New nuclear plant construction
  • Operating nuclear plant
  • Small Modular Reactor (SMR)
  • Decommissioning
  • Department of Energy (DOE)
  • Government
  • Thermal power plants
  • Oil & Gas
  • Petrochemical
  • Major civil projects including:
    • Airports
    • Bridges
    • Stadia
    • Ports & yards
    • Oversized heavy haul

EQUIPMENT

  • Hydraulic cranes
  • Cranes ranging from 90T to 3200T
  • Hydraulic jacks
  • Strand jacks
  • Self Propelled Modular Trailers
  • Semi trailers
  • Out of Gauge transport

OFFICES

Houston, Texas (Office & Yard)
10855 John Ralston Rd
Houston, TX 77044
Tel: 832 536 3669
Fax: 832 615 2678

Missoula, Montana (Office)
7168 Expressway
Missoula, MT 59808
Tel: 406 543 4427

Rowesville, South Carolina (Office & Yard)
122 River Dr
Rowesville, SC 29133
Tel: 832 714 0176

Sorrento LA (Yard)
9204-A Highway 61
Sorrento, LA 70778
Tel: 225 450 7027

Sales
info.us@sarens.com

Accounts
ap.us@sarens.com

Sarens Installs Cold Boxes At ArcelorMittal Steel Plant In Kazakhstan
Snow and sub-zero temperatures are no match for Sarens crew and equipment!
11
November 2019

Despite snow, wind, and sub-zero temperatures, Sarens has completed a successful installation project at the ArcelorMittal steel plant in Temirtau, Kazakhstan.

From November 2018 through January 2019, Sarens deployed its Demag CC 2600 crawler crane and Sumitomo SCX 1500A crane to move cold boxes at the plant's air separation unit. The largest of the cold boxes measured 42 metres long, with an 18-metre radius and weight of 161 tonnes.

The two cranes used in the operation were transported 3,000 kilometres by rail, travelling from Atyrau to Temirtau in just over a month. Once on site, the crew took a week to set up the SCX 1500A, and 16 days to set up the CC 2600, working in difficult winter conditions all the while.

"January is the peak of winter in Kazakhstan, which makes work more difficult," says project manager Azamat Izteleuov. "The temperature was touching -45 degrees, with a lot of snow and wind."

The CC 2600 was set up with a 72-metre main boom and 150-tonne SL ballast. The SCX 1500A was configured with a 21-metre main boom and 56.4-tonne ballast. But rigging the cranes in winter winds wasn't the only challenge: the crew also had to manoeuvre them through the plant's narrow entrance gate and passageway to get to the job site.

Once they were successfully in place, the cranes slewed to make the equipment vertical and install the cold boxes. Despite sub-zero temperatures and limited work space, both the cranes and the 11-person crew performed smoothly and safely.

Sarens would like to thank everyone involved in this successful operation!