Sarens entered US Heavy lift and heavy haul space in 2009 by acquiring Rigging International, a company based in California. We officialy changed the name to Sarens USA, INC. in 2012.
Sarens USA, INC has offices in Houston from where we cover the Gulf area, in Montana from where we cover the Midwest, and in Rowesville from where we cover the East coast.
We provide Engineered Heavy Lifting Services
Heavy Transport Services
Decomissioning and Dismantling Services
Houston, Texas (Office & Yard)
10855 John Ralston Rd
Houston, TX 77044
Tel: 832 536 3669
Fax: 832 615 2678
Missoula, Montana (Office)
Missoula, MT 59808
Tel: 406 543 4427
Fax: 406 543 4505
Conf Rm: 406 532 3093
Rowesville, South Carolina (Office & Yard)
122 River Dr
Rowesville, SC 29133
Tel: 803 534 1348
Sorrento LA (Yard)
9204-A Highway 61
Sorrento, LA 70778
Sarens was commissioned by Mash KhimProm to install two pipe drivers and six drying drums at the Petrikovsky Mining and Processing Plant in Belarus. In an extremely confined space, we had to first move the drying drums between buildings at small angles and finally install them to the design position. The team decided to deploy the Terex Demag CC3800-1 SSL/90m/CW225+50T/SL325T as the main crane and Grove GMK5130-2 as the auxiliary crane. CC3800-1 was the perfect choice for the operation as the crawler crane had sufficient capacity to lift the loads and was able to move on site to reach the loads from the preassembly area, given the confined space. The CC3800-1 was used with a maximum superlift ballast which helped in the installation of fully assembled drying drums. This drastically reduced the execution time.
The equipment was transported in a week from the Polish division of Sarens. The offload and assembly of the cranes took five days.
The six drying drums, weighing 100T each and measuring 22m in length and 3.2m in diameter, were transported to the installation site and lifted at an angle as the diameter of the drums was more than the distance between the two neighbouring buildings at the installation site. The crane had to rotate with the load changing the radius and SL ballast during lifting.
Project engineer, Pavel Vusik, said: “I would like to thank our experienced crane operators who performed the work at two sites with a high level of safety and quality within a short time span. Our teams will be on site until the end of the year to complete installations on the third site of the project.”